Airpave™ for grass paving and fire lanes
AirPave is a flexible porous paving and drainage system for grass paved fire lanes, reinforced turf paving, temporary parking, and swales. With 400+ installations across the country AirPave for grass paving has a strength of 233 psi unfilled, 6747 psi sand filled, and is made of 100% recycled content which can contribute to LEED™ points.
AirPave typically ships with enough fertilizer for 2 layers of the federal guaranteed analysis fertilizer needed: One for the subbase to be worked in before compaction and watered. And the other to be added on top of the sand-filled grid and watered in before the turf grass is installed. We believe if done properly it will set up the grass paving project for the best possible result.
AirPave grass paving can ship more than 91,000 sqft. per truckload and 798 sqft. per pallet, with each part weighing only 3.1 lbs per 7 sqft.
AirPave can save the owner up to $0.80 per square foot or more over our competitors. CSI Master Format 32 12 43, 32 9200 and 32 14 43.
AirpAVE™ is the premier solution for POROUS FLEXIBLE PAVING and fire lane safety and durability.
CALL US TODAY TO DISCUSS YOUR GRASS PAVING PROJECT
THE AIRPAVE™ ADVANTAGE
A 40% or more material cost savings over our nearest competitor and over 1,000 more PSI.
Up to 45% cost savings on shipping, compared with rolled grass paving systems.
AirPave™ has been installed in over 400 flexible porous paving projects.
100% recycled injection-molded co-polymer polypropylene plastic units with an impact modifier added to achieve a (NO-BREAK) plastics classification and a minimum 3% carbon black added for UV protection.
Loading capability is equal to 233 psi empty capacity and 6,747 psi when filled with clean sharp sand, over an appropriate base depth that provides adequate support for project design loads.
AirPave™ is shipped palatalized at 7 sq. ft. per part 114 parts per pallet and approximately 795 sq. ft. per pallet. Unit weight = 3.10 lbs, volume = 8% solid.